| Customization: | Available |
|---|---|
| Agent: | Dry Powder |
| Type: | Portable Fire Extinguisher |
|
Still deciding? Get samples of US$ 55/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Type | 1kg | 2kg | 6kg | 9kg | 12kg |
| Cylinder Size | D85*H270 | D110*H317 | D162*H422 | D184*H489 | D184*H581 |
| Capacity | 1.25L | 2.5L | 7.5L | 11.25L | 13.5L |
| Net Weight | 2.4kg | 4.1kg | 9.8kg | 14.2kg | 18kg |
| Working temp | -20ºC~60ºC | ||||
| Working Pressure | 14 Bar | ||||
| Test Pressure | 27 Bar | ||||
| Discharge Time(s) | 9s | 11s | 17s | 20s | |
| Fire Class | 8A 34B C | 13A 70B C | 34A 183B C | 55A 233B C | 55A 233B C |
| Packing Size(mm) | 490*250*370 | 370*270*415 | 170*170*560 | 205*200*610 | 210*200*700 |
CO2 Fire Extinguisher
| Type | 1.3kg/3lbs | 2kg | 3kg | 4.5kg/10lbs | 6kg | 7kg/15lbs |
| Cylinder Size (mm) | D108*H330 | D114*H420 | D114*H610 | D152*H520 | D152*H670 | D152*H760 |
| Wall Thickness (mm) | 4.2 | 4.5 | 5.5 | |||
| Cylinder weight | >3.90kg | >5.3kg | >7.3kg | >12.2kg | >13.5kg | >16.5kg |
| Capacity | 2L | 3L | 4.5L | 6.8L | 9L | 10.5L |
| Agent | >1.3kg CO2 | >2.0kg CO2 | 3.0kg CO2 | >4.4kg CO2 | 5.0kg CO2 | 7.0kg CO2 |
| Net Weight | 5.8kg | 7.8kg | 11kg | 17kg | 20.5kg | 25kg |
| Measurements (cm) | 16*13*46 | 17*13*55 | 17*13*72 | 23*17*64 | 22*17*79 | 22*17*88 |
| Operating Temperature | -20ºC to +60ºC | |||||
| Working pressure | ≤15Mpa | |||||
| Test pressure | 25MPa | |||||
| Burst pressure | ≥40Mpa | |||||
| Discharge time | ≥8s | ≥15s | ||||
| Discharge range | ≥2m | ≥2.5m | ||||
| Type | 500ML | 1L | 2L | 6L | 9L |
| Cylinder Material | SS304 | ST12 | |||
| Cylinder Weight (kg) | 0.4 | 0.53 | 0.75 | 2.7 | 3.2 |
| Cylinder Capacity (L) | 0.65 | 1.3 | 2.5 | 7.8 | 11.8 |
| Working Pressure | 14 Bar | ||||
| Test Pressure | 29 Bar | ||||
| Working temp | 0ºC to +60ºC | ||||
| Propellant gas | Nitrogen / N2 | ||||
| Declare fire rate | 3A 13B C | 1A 10B C | 8A 34B C | 1113B 89B | 113B |
| Packing Size (mm) | D75*H260 | D85*H340 | D102*H420 | D160*H550 | D180*H600 |
| Total Weight (kg) | 1.12 | 1.8 | 3.1 | 9.3 +/- 0.1 | 13.2 +/- 0.2 |
| Agent | 6% AFFF | ||||
| Type | 10kg | 12kg/25lbs | 20kg | 24kg | 30kg | 50kg |
| Cylinder Material | CK45 | 37Mn | ||||
| Wall Thickness (mm) | 5.5 | 6 | ||||
| Cylinder Weight (kg) | 19.5 | 25 | 50 | 55 | 60 | 100 |
| Capacity (L) | 15 | 18 | 30 | 36 | 45 | 80 |
| Filling With CO2 (kg) | 10 | 12 | 20 | 24 | 30 | 50 |
| Net Weight (kg) | 39 | 46 | 95 | 100 | 120 | 195 |
| Measurement (cm) | 38*28*115 | 38*28*132 | 110*50*110 | 110*50*120 | 110*60*130 | 110*70*120 |
| Using Temperature | -20ºC to +60ºC | |||||
| Working Pressure | ≤15Mpa | |||||
| Test Pressure | 25MPa | |||||
| Burst Pressure | ≥40Mpa | |||||
| Discharge Time | ≥15s | |||||
| Discharge Range | ≥3m | |||||
|
|
|||
|
|
|||
|
1. Dry Powder Chemical Fire Extinguisher
|
2. CO2 Fire Extinguisher (CARBON STEEL)
|
||
|
3. Foam & Water Fire Extinguisher
|
4. Trolly Fire Extinguisher
|
||
|
5. Dry Powder Automatic Fire Extinguisher
|
6. Fire Extinguisher Empty Cylinder
|
||
|
7. Stainless Steel Cylinder
|
8. UL Standard Fire Extinguisher
|
||
|
Valve material
|
brass
|
|
Cylinder material
|
ST12
|
|
Pressure gauge
|
spring pressure gauge/imitation diaphragm pressure gauge/diaphragm pressure gauge
|
|
Bracket
|
iron/plastic, colour:red/black
|
|
Working pressure
|
14bar, testing pressure:25bar
|
|
Cylinder thickness
|
1.4mm/1.5mm/1.8mm
|
|
Cylinder diameter
|
150mm,height:470mm
|
|
Valve releasing device
|
with/without as customers'requirements
|
|
Powder component
|
ABC/BC 10%,20%,30%,40%,50%,70%,75%,80%,90%,95%
|
|
Carton size
|
56*33*16mm /2PCS
|
|
How to use the fire extinguisher
|
|||
|
1. Pull out the safety pin, hold it away from you and release the locking mechanism.
|
|||
|
2. Aim low and target the source of the flame rather then the flame itself. Ensure that you stand at least 1.8 meters away from the fire, make sure that you are not spraying against the wind direction.
|
|||
|
3. Squeeze lever evenly , and slowly with the extinguisher in an upright postion.
|
|||
|
4. Sweep the nozzle from side to sode, target the source of the flame till either the fire is out or the extinguisher runs dry.
|
|||
|
Usege Rang
|
|||
|
1. Fire from solid (Ordinary Combustion)
|
|||
|
2. Fire from liquid (Fiammable Liquid)
|
|||
|
3. Fire from gas (Fiammable Gas)
|
|||
|
Warnings
|
|||
|
1. Do not use if pressure indicator enters red section.
|
|||
|
2. Do not use outside specified temperature range.
|
|||
|
3. The extinguisher should be inspected every year, it should be recharged if the indicator of the pressure gauge is under the green sector.
|
|||
|
4. The extinguisher should be recharged once be used. It should be tested before recharging.
|
|||
|
5. The extinguisher should be put in the place where the air is dry and not corroding. And it mushn't be put on the fire, in the sun, in the rain and be rammed.
|
|||
|
6. Test pressure(pt): 28Bar
|
|||
|
7. Temperature range: -30 to + 60
|
Carbon Fire extinguisher Water-Based Fire Extinguisher Stainless Steel Cylinder Dry Powder Fire Extinguisher
Trolly Fire Extinguisher Automatic Fire Extinguisher UL Standard Fire Extinguisher Korea Fire Extinguisher
Fire Extinguisher Cylinder ABC dry Powder Fire Extinguisher Empty ABC Dry Powder chemical Cylinder
Zhejiang Ketai Safety Technology Co., Ltd is located in jiangshan city, Quzhou, Zhejiang province. With superior geographical environment and convenient transport, it is a modern enterprise integrating R&D, production and sales of fire extinguisher cylinders, fire extinguisher and intelligent fire fighting equipment . The main products are carbon dioxide fire extinguisher, water-based fire extinguisher, ABC dry powder fire extinguisher and various fire extinguisher accessories.
Since the establishment of the factory, through the introduction of talents, news equipment, and new process, we have continuously increased our efforts in product development ,technological innovation and independent innovation. we now have an output of 5 million dry powder , water-based , carbon dioxide fire extinguisher and alloy steel cylinders. Production capacity. The company has complete production equipment, advance detection equipment , more than 120 employees, over 20,000 square meter of workshop area and total assets of more than 30 million yuan.
"Chanpion quality, safety and security" is the company's purpose. We always take responsibility for manufacturing high quality products and serve more custom. Let more people in the world use the products made in chain and enjoy the safe protection given by chinese-made fire extinguisher equipment.
|
Good and safe Package . we packing very careful protection your goods and samples . Accept custom packaging.
|
|||
|
1. HS code for you :
|
8424100000
|
||
|
2. Genrenal packing :
|
we have genrenal packing it: each piece put in opp bag + carton box. if you need woven bag, we happy do it for you.
|
||
|
3. Coustomed packing :
|
follow your request or packing details. save you cost and time, more profit for u .
|
||
Q: What is your main product?
A: ABC dry powder chemical fire extinguisher, co2 fire extinguisher, water-based fire extinguisher.
Q: What is the MOQ?
A: The MOQ is 200 PCS, but we also can provide you samples for quality inspection.
Q: What is the delivery time?
A: Usually within 20 days, samples will be prepared within 5 days.
Q: Our company needs some samples. Can you provide them for free? Or do you need us to pay for them?
A:According to the products, it we charge the samples, freight will be return back when we confirmed the order.
Q: Where is your factory located? How can I visit there?
A: We are located in Quzhou City Zhejiang province China.
50 mints by High Speed Train from YIWU city.
80 mints by High Speed Train from Hangzhou city.
120 mints by High Speed Train from Shanghai city.
All our clients are warmly welcomed to visit us.
Q: What is your payment terms?
A: T/T, L/C ,Western Union,Cash are accepted.
){kind=link}